Pip-Cap 3000 (Pipboy Omron 3BK Cap) - V1
Pip-Cap 3000 (Pipboy Omron 3BK Cap) - V1
3D
Published 2021-01-19T10:02:54+00:00
A PIP-Boy themed mechanical keyboard cap. This one works with omron b3k siwtches found in DAS and Logitech Keyboards, you can find two STLs here, because DAS and Logitech depstite sharing the same switch uses different orientations in the pins.
The cap has a hole ho make light shine inside. You can print a 1cm by 1cm image to put in the iside of the display. For best results, fill the inside of the display using trasparent packing film to scatter the light aroudn the image, then use a trasparent filler to make the display screen.
You can hack this design on Trinkercad
I printed this on a ELEGGOO Mars & back resin. Used default settings for black resin, 5 bottom layers @ 65s and each layer exposed at 9.5s. Make sure to cure the cap under UV light before painting or use.
| Date published | 19/01/2021 |
| Benoetigte Zeit | 100 - 120 Minuten |