Polaris Slingshot Roll Cage Cargo Rack Mounting
Polaris Slingshot Roll Cage Cargo Rack Mounting
3D
Published 2019-11-26T15:08:29+00:00
This is my version of the Roll Cage Roof Rack Mounting system.
I looked up to see if they made a Polaris Slingshot Roof Rack and turns out they Did.
However i didn't want to pay their prices so i made my own.
There are several Variations of this mount and you can use which ever one you like.
I went with the V7 one at 50% infill at .2mm layer, plus you will need 12 2.5 inch 5/16 Self locking Nuts and Bolts along with washers.
I also used 1 inch PVC pipe for the cross members and some 20mil Plumbers tape so i would scratch the paint.
The other versions simply just slip on with a little force.
As you can see in the Pictures it worked out very Well.
I just Added V8 Front Mounts and Rear Mounts, These have larger top holes for the PVC pipe to slide in . Don't worry about the front pipes if they slip out, That is what the washers will do to keep them in place.
Also V8 Has 1mm Support braces so there will be no need to add support during printing.
| Date published | 26/11/2019 |