Poltergust G00
Poltergust G00
3D
Published 2019-10-25T16:38:05+00:00
My kid wanted a Luigi's Mansion costume for Halloween, couldn't find anything already designed for the Poltergust so i designed a thing. total weight is 2.2kg, estimated 60hrs total print time depending on settings infill etc.
if you want to print specific colours for parts as i have, you'll need roughly 1.2kg of red, 400g black, 300g green 200g grey 100g clear petg, stl's are named and colour coded to try make your life a bit easier.
main body is in three parts, i used 4 walls, 5 top bottom layers and 7% infill to keep it light, alignment pins are one file on a raft ready to go. no support for the bottom/ mid main body, but the top half will need support touching build plate and from model.
| Date published | 25/10/2019 |
Printed on began as my CR-10 and some reprints on my X1C. This came together pretty well. As with any build, there was bound to be some customization and a couple of the things of note different in my build are: - swapped the "hose" link for roughly half of a dishwasher drainage hose - there's a sound module with some audio clips from the latest game in the series in there, plays when you press the round button on the handle - wiring through the length of hose to the business end is protected by a flex tube sleeve (think for automotive wiring) - a couple more short lengths of the flex tubing provide pass throughs between the main body and the lower section for the wiring to keep the wires protected from the rougher edges of the plastic I drilled through (and stabilized with some CA glue)