Foot / base plate for Pop-up gazebo
4,052
views
137
downloads
0 comments
Loading comments... 
Foot / base plate for Pop-up gazebo
3D
Published 2017-11-16T10:34:48+00:00
6
0
Add to Collection
Description
This is a base plate for pop up gazebo with a 20mm inner diameter.
This foot slots inside the metal inner leg, rather than fitting over the outside of the leg.
You can buy it 3D printed on Ebay: https://www.ebay.com/itm/112613937306
Printing Details
You can print the part in PLA. But as it will be used outdoor, I would recommend using Co-Polyester filaments.
Print the base plate with the flat side on the platform (like on the picture).
I recommend at least 50% or 70% infill (so the part will be strong enough) and a layer height of 0.2mm or lower (to increase adhesion between the layers).
No need for support.
Technical Information
| Date published | 16/11/2017 |
| Menge an Filament | 30g |
| Dimensionen | 58.3mm x 58.3mm x 40mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Very Easy |
| Support Free | YES |
More Information
Object Parts
