Project Boxes of Various Sizes
Project Boxes of Various Sizes
3D
Published 2016-11-24T10:48:51+00:00
Injection molded project boxes are great for high quality stuff, but 3D printed boxes give you more choices of size and you can print them on demand with the holes you need pre-cut already.
For example, if you have a larger printer you can print out the box needed with the holes pre-cut to make the temperature process controller box seen in the main photo.
(FYI the box shown in the main photo was NOT 3d printed).
I chose to print this using concentric infill. It makes for a beautiful exterior with sparkle highlights. However, I also chose to print using PETG which does not do concentric infill on the top layer very well at all. This ended up with a stunning exterior and a less-than-perfect interior. The interior flaws are not "fatal" and the box is still very useable. The looks are amazing, though, and worth the effort.
| Date published | 24/11/2016 |
| Benoetigte Zeit | 475 - 3840 Minuten |
| Menge an Filament | 53 |
| Dimensionen | 75x50x30 |
| Technologie | FDM |
| Support Free | YES |