Rasbperry case
Rasbperry case
Published 2018-12-13T17:15:50+00:00
Un petit boitier pour votre Rasbperry Pi 3 B et B+
Facile à imprimer avec trois option pour le couvercle
Cercle, windows et toutes options, accès aux nappes vidéo et aux pins sécables
Matériel nécessaire : 4 vis M3 5 mm
Economique environ 50 g de PLA, temps d'impression 2 heures
Bon print
A small case for your Rasbperry Pi 3 B and B+
Easy to print with three options for the cover
Circle, windows and all options, access to video tablecloths and breakable pins
Required material: 4 screws M3 5 mm
Economical about 50 g PLA, printing time 2 hours
Good print
Matériel nécessaire : 4 vis M3 5 mm
Economique environ 50 g de PLA, temps d'impression 2 heures
layer 0.1 infill 20%
Required material: 4 screws M3 5 mm
Economical about 50 g PLA, printing time 2 hours
Date published | 13/12/2018 |
Benoetigte Zeit | - 120 Minuten |
Menge an Filament | 50 grams |
Technologie | FDM |
Schwierigkeitsgrad | Easy |
Support Free | YES |
Bonjour, je ne comprends pas bien le sens de votre question J'ai utilisé SolidWorks pour la conception et mon Raspberry rentre parfaitement dans le boitier