Reel 'Charging Cable'
Reel 'Charging Cable'
3D
Published 2018-07-23T16:53:49+00:00
A reel that can store your charging cable when you travel for example!
Your cable won't get squeezed so easily between your baggage when you wrap it on this reel.
🎞 Long video: https://youtu.be/kqJb2Waw-OA
âš¡ Short video: https://youtu.be/fIdQe68JvMc
Â
There are 5 clamps on the reel, so you never have a loose end.
Using multiple clamps make the cable always stuck.
This reel is suitable for a Ø3mm USB to micro USB cable.
âš Usage of any models from 3DParts4U will be at your own risk!
âš™ My PLA Simplify3D print settings:
- 3000mm/minute (50mm/second)
- hotend 185°C | bed 55°C
- 250 micron | infill 20%
- 3 top layers | 3 bottom layers | 3 outline layers
- brass nozzle 0.35mm
- extrusion width 0.40mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 75%
- 25% normal support (1mm outside product) | 15% dense support (3 layers)
| Date published | 23/07/2018 |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |