TribesStoreIdeenFORUMNEWCanvasThe AdventureNEWPhysical

Retaining band holder for luggage compartement cover [Toyota Aygo 2005-2014 / Peugeot C1]

3D File Logo  3D

Published 2018-08-28T16:50:18+00:00

    Retaining band holder for luggage compartement cover [Toyota Aygo 2005-2014 / Peugeot C1] image
    Retaining band holder for luggage compartement cover [Toyota Aygo 2005-2014 / Peugeot C1] image
    Retaining band holder for luggage compartement cover [Toyota Aygo 2005-2014 / Peugeot C1] image
    Retaining band holder for luggage compartement cover [Toyota Aygo 2005-2014 / Peugeot C1] image
    Retaining band holder for luggage compartement cover [Toyota Aygo 2005-2014 / Peugeot C1] image
Loader
3D
  1. Ersatzteile |
  2. Ersatzteile>
  3. Cars & Other Vehicles>
  4. Cars
3,439 views 39 downloads
Community Prints Add your picture
Be the first to share a picture of this printed object
0 comments
    Loading comments...

    Retaining band holder for luggage compartement cover [Toyota Aygo 2005-2014 / Peugeot C1]

    3D File Logo  3D

    Published 2018-08-28T16:50:18+00:00

    Max

    @M4x

    1 object

    0 Followers
    4 0 Add to Collection
    Description

    Description

    The original holder for the retaining band of the luggage compartment cover of my Toyota Aygo (2008) stopped working. It worked like a barb (you can see the original part in some of the pictures - used that one until I got an appropiate cord). Because the hole in the luggage compartment cover got worn out over the years, the original holder got lose all the time until it wasn't working at all.

    I've designed the replacement part shown here. I used a washer and a screw (made for use with plastics) to fix the replacement part to the luggage compartment cover from the underside. A cord (I've installed one with a diameter of 4 mm but 3 mm would look better in my view) is knotted to the holder and a slipknot on the other side of the cord is used to attach it to the boot lid. I recommend a bowline knot for both ends of the cord. You can remove the cover as easy as before.

    Now the cover goes up again when I'm opening the boot lid which is very convenient.

    I've printed the part on a printer which wasn't fully calibrated at the time of printing. Regarding the print quality, there are several things that can be improved. Since I'm going to sell the car, I don't think that I'm going to print it again.

    Used software

    Files

    I've attached the STL, STEP and FCStd files. This way you're able to easily adjust the dimensions using FreeCAD.

    Everything else :-)

    Please contact me if you've any questions. if you've used this part, please leave a comment and share a picture of your make. Thank you!

    P.S.: Unfortunately, I don't know if the proper model years regarding the Peugeot C1 are consistend with the model years of the Toyota Aygo. If someone knows anything about it, please let me know. I would be happy to edit the title accordingly.

    Show more Zeige weniger
    Lizenz
    Printing Details

    General information

    I've printed the part on a printer which wasn't fully calibrated at the time of printing. Regarding the print quality, there are several things that can be improved. Since I'm going to sell the car, I don't think that I'm going to print it again.

    Printer

    MKC MK2 v1.0

    Slicer

    Simplify3D

    Layer

    • Primary Layer Height: 0,1 mm
    • Top Solid Layers: 10
    • Bottom Solid Layers: 10
    • Outline/Perimeter Shells: 4

    Infill

    • Internal Fill Pattern: Fast Honeycomb
    • External Fill Pattern: Rectilinear
    • Interior Fill Percentage: 30 %
    • Outline Overlap: 15 %
    • Infill Extrusion Width: 150 %
    • Minimum Infill Length: 5,00 mm

    Support

    Note: I've printed this part with (too much) infill. I think that you should be able to print it without supportor only with support near the bottom to support the overhang.

    Material

    ABS from Material4Print; gray

    Temperatures and build surface

    • Extruder: 245 C
    • Heated Bed:
      • First Layer: 120 C
      • Following Layers: 110 C
    • build surface: Pertinax

    Speeds

    • Default Printing Speed: 80 mm/s
    • Outline Underspeed: 50 %
    • Solid Infill Underspeed: 80 %
    • Support Structure Underspeed: 80 %

    Technical Information
    Date published 28/08/2018
    Benoetigte Zeit 20 - 21 Minuten
    Menge an Filament <= 2,77 g
    Dimensionen 20,5 mm x 15 mm
    More Information
    Object Parts
    Retaining Band Holder Luggage Compartement Cover Toyota Aygo 2005 2014 V1 1.Stl
    3D View
    Tags
    car part replacement spare toyota peugeot Aygo C1
    Interesting objects for you
    Show more