Rock Climbing Hold - Slopey Pinch
Rock Climbing Hold - Slopey Pinch
3D
Published 2015-11-20T15:53:22+00:00
Geometric slopey pinch for your home climbing walls.
This hold will work best on Slabs & vertical walls as a tricky pinch or for feet.
It is best to lightly sand down the part after printing to remove the shine and provide a little more grip.
These have been designed to take Countersunk M10 bolts and 5mm wood screws.
If you print in PLA please leave 72 hours between the end of printing and first use to allow the print to relax and attain its optimal strength.
Get in touch if you want any more sizes and I'll see what I can do.
As with the other holds I would try printing with a layer height of 0.2mm, 4 perimeter shells and 40% rectilinear infill. If you try with any other settings please let me know how it turns out.
| Date published | 20/11/2015 |
| Menge an Filament | 44g |
| Dimensionen | 122x60x24mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |
| Support Free | YES |
