Sans Mask from Undertale
Sans Mask from Undertale
3D
Published 2020-04-16T18:27:38+00:00
Seeing this epic mask fills you with determination.
This is a full scale mask of Sans from the video game Undertale. It is printed in multiple pieces which will need to be glued or melted together. The mask was scaled to my head, which is about the average size of a male or slightly lighter. Before committing to this build, make sure you have the scale right.
I glued the parts together and once it was secure, used a 3dprinting pen on the inside to melt the pieces permanently. After painting, I used foam for the inside (rougher than I had hoped) and for the nose just used a little black acrylic paint. For the eyes, I bought a shaded face shield off of Amazon for about 15 dollars. It can make two of these masks so the cost is only around $7. The face shield makes your surroundings quite dark.
Face Shield (Affiliate Link): https://amzn.to/2yjUpiI
This took me forever to make, especially because of the lockdown. Posting your make, leaving a like, or checking out my other models related to video games would be greatly appreciated. Thanks and I hope you enjoy!
This mask was printed on the Prusa mk2s with default settings. Support material is required unfortunently as the overhangs exceed 60 degress. The mouth piece didn't fit that well so I modified the file. However, I did get the first print of the mouth to work so I didn't print the updated one. I hope it works well for everyone else.
| Date published | 16/04/2020 |
| Menge an Filament | 1000g |
Paintjob in the style of the Smash Bros DLC. Teeth took a bit of tinkering to fit mouth. Awesome file!