Shagun's Flexi-Cap Bottle
Shagun's Flexi-Cap Bottle
Published 2014-12-09T02:18:37+00:00
iMakr and MyMiniFactory.com have teamed up with Holbrook Primary school in Suffolk as part of an educational initiative to teach and encourage kids from primary schools to learn how to design for 3D printing.
The purpose of the Flexi-Cap Bottle, is to help you regulate the amount of ketchup, sauce, dressing, etc. with three openings on the second layer of the cap. The model has three parts; the bottle which will contain the sauce, the second layer of the cap which consists of three holes, and the top most layer is the cap. The second layer fits snuggly on the bottle. To use twist the top cap to line up with the underlying opening which you desire.
Print at 0.2 mm layer height, with 10% infill. This uses 8 g of filament and takes 35 minutes.
Date published | 09/12/2014 |
Benoetigte Zeit | 35 - 45 Minuten |
Menge an Filament | 8 g |
Dimensionen | 88 x 83 x 5 mm |
Schwierigkeitsgrad | Very Easy |