SkullBaby Love
SkullBaby Love
3D
Published 2018-06-19T17:25:20+00:00
SkullBaby does not understand "love", but he'll give you his heart anyway. At least I think it's his heart...
SkullBaby is a cute little chibi skeleton character who maky look spooky, but is simply misunderstood!
This was my first attempt at a digital sculpt using the Forger app on an iPad Pro with Apple pencil. The design is based off an old T-Shirt I used to sell on CafePress.com years ago, which in turn was based off an old Flash animation I made in high school. Some changes were made from my original to make it easier to print.
I print at 0.16mm layers and lower with a 0.4mm nozzle, but this should work at 0.2 as well. 3 outlines, 15-25% infill.
The figure prints in three parts (head, body, and heart) with supports needed on the head and body. I have also provided split versions of the body and head that can be printed without support but must be glued together. I have printed both versions successfully, each is shown in the photos.
| Date published | 19/06/2018 |
| Benoetigte Zeit | 120 - 121 Minuten |
| Menge an Filament | less than 50g depending on settings |
| Dimensionen | about 45mm x 45mm x 85mm |
| Technologie | FDM |
| Support Free | YES |