KS3MNI01 - Fowlfolk Core Miniatures
$7.00 KS3MNI01 - Fowlfolk Core Miniatures
3D
Published 2021-01-30T06:30:43+00:00
Fowlfolk Miniatures was one of the first sets we decided to create for the Sky Islands campaign. When Colin showed us the terrain, we talked about races might live in a skybound city. We knew instantly that we wanted a large population of avian races, and this set filled that desire. Most of the miniatures were made by Jacob Armour and Nasos Maloudis in the early days of the preparation. We hope you enjoy this flock of townsfolk and we look forward to your ideas for expansion!
A special thank you for this set goes out to all the test printers on our Discord channel. This set was a challenge, and with their help we conquered it. We could not ask for a more dedicated and passionate group of fans than our Discord group. You can find a link to join on our website.
MINIATURE RECOMMENDED PRINT SETTINGS
-Layer Size: 0.1mm recommended, 0.05mm for resin.
-Infill: 25-35% recommended.
-Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
-Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
-Raft/Brim/Supports: None
| Date published | 30/01/2021 |
| Price | $7.00 |
| Support Free | YES |
Resin And Fdm