SPEEDY - a 3d-printable RC-flying-wing
SPEEDY - a 3d-printable RC-flying-wing
3D
Published 2017-10-09T12:46:02+00:00
This is a little sailplane to be printed on almost any 3D-printer. It has a wingspan of about 616mm, and has a weight of about 300gr with electronics included. It has a fast wing profile (Eppler E184) to be a fast ridge soaring thing...
- Update 1 (10/09/2017) : Added a new canopy with two holes for a 3mm wood beam, can be used to fix the canopy with some rubber bands. See the image to see how to add the rubber bands to fix the canopy. The rubber band can also be put inside to be invisible.
- Update 2 (10/10/2017) : Added two winglets for better stability during flight. Use more "normal" parameters wehen slicing them, i used 3 loops and 25% infill.
Just printout with only one loop to get a light weight, just over extrude a bit (i used 1.5 as a factor) to be sure the loops are closed at every part. Use a raft to be sure the model fixes to the print bed.
I sliced this with KISSlicer, see the images for parameters.
| Date published | 09/10/2017 |
| Technologie | FDM |
| Schwierigkeitsgrad | Very Easy |
| Support Free | YES |