Studio Mic Shock Mount
Studio Mic Shock Mount
3D
Published 2018-07-03T08:46:28+00:00
My design of a pro quality studio shock mount. Didn't want to drop about $100 on one and this one was only about $12 with all the hardware and all needed. My rings are from aluminum but only because the bigger rings didn't fit on the printer i had at the time.
Print all in ABS at full infill and .2 layer resolution, the tpu pieces well obviously in TPU :p
Parts needed to print:
1- Shock Mount Mic Ring Clip
2 - Shock Mount Small Rings
1 - Shock Mount Big Ring
1 - Sock Mount Mic Boot
14 - Shock Mount SCREW PIECE
8 - Shock Mount TPU PIECE
Hardware needed:
14 - 10mm M3 Screws
7 - 20mm M3 Standoffs
16 - M3 Washers
8 - 12mm M3 Screws
8 - M3 Nylock Nuts
2 - 20mm M4 Screws
4 - M4 Nylock Nuts
2 - 50mm M4 Screws
2 - M4 Washers
1 - Paracord (choose color to your liking) - This is for the actual damping of all the vibrations and what essentially makes this mount a shock mount. This can easily be found at any Joann's or Michael's craft stores
| Date published | 03/07/2018 |