Subby the interactive youtube subscriber robot
Subby the interactive youtube subscriber robot
Published 2019-11-12T19:30:27+00:00
video: https://www.youtube.com/watch?v=_MJwene8mNA
Editable Fusion 360 source files can be found here:
https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/youtube-mascot-robot
Subscribe to my youtube chanel to make the robot move. Share with your friends and familly so they can also make the robot move. Link to build
You can always check my youtube chanel to see if the robot is online. link: https://www.youtube.com/channel/UCRs9vVRoVo4BTBceFRaJnpA?
To get the subscriber amount from my YouTube chanel I made a visual basic aplication that searches for the subscriber number in the youtube chanel URL page. The aplication will than send this number to the COM port using serial strings. The arduino will receive this serial string wich contains the subscriber amount number and will than give command to the servo's. I uploaded the visual basic program to my dropbox link: https://www.dropbox.com/sh/4w9aj4fclk69q4f/AAASOMR43Vla12e0UWm-WTgta?dl=0.
Components used:
8 × 9g Servo motor
link: https://www.banggood.com/TowerPro-SG90-Mini-Gear-Micro-Servo-9g-For-RC-Airplane-Helicopter-p-1009914.html?p=E01411629100201406T1&custlinkid=359550
1 × White LED
link: https://www.banggood.com/Geekcreit-375pcs-3MM-5MM-LED-Light-Emitting-Diode-Beads-Resistance-Lights-Kits-Bulb-Lamp-p-1027601.html?p=E01411629100201406T1&custlinkid=669272
1 × 200 ohm resistor
link: https://www.banggood.com/Wholesale-Geekcreit-600pcs-30-Kinds-Value-1-14W-Metal-Film-Resistor-Assorted-Kit-20pcs-Each-Value-p-53320.html?rmmds=search&cur_warehouse=CN
1 × Arduino nano
link: https://www.banggood.com/Geekcreit-ATmega328P-Nano-V3-Module-Improved-Version-With-USB-Cable-Development-Board-For-Arduino-p-933647.html?p=E01411629100201406T1&custlinkid=255135
1 × prototype board 4cmX6cm type: 107822J2H
link: https://www.banggood.com/Geekcreit-40pcs-FR-4-2_54mm-Double-Side-Prototype-PCB-Printed-Circuit-Board-p-995732.html?p=E01411629100201406T1&custlinkid=669188
1 × 2S lipo battery
link: https://www.banggood.com/7_4V-2S-2000mAh-8C-Lipo-Battery-Compatible-for-Frsky-ACCST-Taranis-Q-X7-Transmitter-p-1249125.html?p=E01411629100201406T1&custlinkid=669244
1 × DC to DC step down regulator
link: https://www.banggood.com/LM2596-DC-DC-Verstellbar-Step-Down-Schaltregler-Power-Supply-Module-p-88252.html?p=E01411629100201406T1&custlinkid=255154
1 × 5V relay to switch the car horn on and off and other functions
link: https://www.banggood.com/5V-8-Channel-Relay-Module-Board-For-Arduino-PIC-AVR-DSP-ARM-p-74110.html?p=E01411629100201406T1&custlinkid=669239
1 × Heat shrinks
link: https://www.banggood.com/328pcs-Heat-Shrink-Tubing-Insulation-Electrical-Shrinkable-Tube-Sleeve-Cable-21-p-1362019.html?p=E01411629100201406T1&custlinkid=669227
1 × Small PCD push buttons
link: https://www.banggood.com/100pcs-Mini-Micro-Momentary-Tactile-Tact-Switch-Push-Button-DIP-P4-Normally-Open-p-917570.html?p=E01411629100201406T1&custlinkid=669260
1 × 12V car horn
More info can be found here: https://hackaday.io/project/150345-subby-the-interactive-youtube-subscriber-robot
All my project files, instructions, schematics, are provided for free so everyone around the world can enjoy them. Feel free to support me so I can create and share even more awsome projects. Any amount of support is greatly appreciated :-) paypal.me/BrianBrocken
Have a nice day!
Date published | 12/11/2019 |