Loading
Tarrasque
3D
Published 2019-12-04T13:13:42+00:00
$24.99 Tarrasque
3D
Published 2019-12-04T13:13:42+00:00
4 inches base.
Pre-supported
| Date published | 04/12/2019 |
| Price | $24.99 |
| Menge an Filament | 186g |
| Dimensionen | 142mmx153mmx97mm |
Love it. made it compatible with my Warhammer army. Basic paint on.
Base is fdm printed,
Love the model. Changed the color scheme completely like 2 or 3 times. Took about week to print and paint. I did have trouble matching all the limb to the base but that's just part of the printing process. I will try again and attempt it bigger and take more time when I get more experienced.
I printed it at 200% size which I think made some of the joints off. Had to do some gap filling.
First attempt at miniature painting.
My rendition of the tarrasque from Lord of the print
That. Was. Fun.
Printed in parts and glued. Insanely good quality print, my joins weren't the best, but that's on me. Fits really well into it's base.
My first BIG print. Thanks LotP!
Printed it in 7 parts on my Elegoo Mars. Tried to emulate the paintjob I saw in one of the pictures here and am pretty satisfied with the result. Used some new techniques on the bridge, which also worked out pretty well.
Printed at 0.05mm/60mm/s on an Anycubic Photon Mono with some Anycubic Grey resin // Painted with some Citadel, Vallejo & Army Painters paints
Hello, this is my print #2-#3 with my new printer also my 2 first trial at painting minature and anything else beside walls :) the blue dragon is 100% and the orange is 300% I hope like it
Here is my take on the beast. I loved printing and painting it. This sat printed and assembled for a couple months before I decided how I wanted to paint it.
Finally got this bad boy printed up
Always thought the official artwork and other models looked kinda goofy. This guy though... He inspires fear.
Good news, works fine in 200% scale, lol
200% goodness
Just finished painting an undersized print of this one. I want to airbrush a full-size one.
:) my Try
Awesome file
My take on this great model:
I made this one for a level 20 one shot I had and I think it came out really well!!!
Painted for a friend. Weirdly, I think my favorite part is the bridge.
Yeah... this one was tons of fun! Excellent model!
Avatar inspired Tarrasque
Thank you for this amazing design. New to the hobby and this was the first massive creature I painted and incorporated into my D&D session. Really enjoyed revealing this to my players.
Printed at 200% size to provide the appropriate terror to my players. Printed on an Elegoo Jupiter
Killer model of a classic. What else is there to say?
This was one of my first large prints, and there were some issues with the supports bonding to the model. It could have been something on my end, I was still new to printing, and I don't really remember. Even so, it turned out really well.
Slap chopped two greys and a white over black primer, then carefully flooding the model with army painter speed paints. Can't wait to scale it up to the largest my printer can handle.
Took about 3 weeks to print, clean up, construct, green stuff seams and paint with it twice the size of the stl file. I throughly enjoyed every second of it on this fantastic model!! I may revisit the paint scheme but I tried to have it similar to the 5e tarrasque! I will be printing it again for fun soon! :D