Here's my print of Mando, amazing design and of course no need for supports. This will make a great gift!

Ran in some rainbow silk I already had on the spool

Thanks for the model!

Amazing sculpture, thank you.

Awesome model .... printed at 120% with 5% infill ..... thx

Awesome work ! i love it ! thx !!!

Thanks a lot for the model! Awesome work! Printed @0.1 layer, 5% infill, no supports.

0.10 Layer height 5% infill No supports

Very nice model. Thanks! Printed with Atomic Silky Red PLA @.2 layer.

Congratulations for the model. Love it!!!

Amazing detail in the files

Silver spray (magasin action) Mauvais paramétrage de la rétractation mais le résultat est bon. UN GRAND MERCI POUR CE MODELE

Se ve increíble. Es un gran trabajo

This is the way. Model by Rober Rollin here on MMF. He has some fantastic busts on his profile, most are support free, and most of the stls are free as well. Highly recommend his work! I printed this one at 0.10mm later height , and at 75% of the original scale. Nearly a 14hr print!

Thank you for the Design

Great model!

Great model, printed at 200%

As soon as I found this STL I had to print it...Its awesome

Nice stl thx.

Printed with no supports at 0.2mm on 0.4mm nozzle with Amazon basics PLA. 205/50 temp. This is just stunning...there are little bits of detail that are hard for me to photograph. Hoping to paint it but I may do a .12 version first. I used zigzag I fill at 5% and it cut the print time down to about seven hours (vs 24 with 20% grid at .12). Thankyou for such a great model!!

amazing model! im so happy with the outcome! thanks alot!

Thanks so much for the model!

Super Model! Thanks!

Amazing design, thanks for sharing Printed on Eryone ThinkerS 1.6 lh 205 temp 60 bed

Great design and easy to print

Muy buen stl

Beautiful sculpt. Had fun with this one. Edited model to be a simpler bust and air brushed.

thank you !!!

Fantastic print, thanks for the great model!

Great desin

Cool design

Thanks for the model! love it!

Good, easy to print model. No supports needed.

First time painting a print. Have to say it came out really good. Wish I would’ve printed in a higher res but this is fine :)

great model! Print in marble PLA.

Great model, thanks! Printed on silk PLA with basic primer layer and then chrome effect spray paint :)

It's a awesome model, thank you!

Thank you

Lovely model! Thank you!

printed by PLA at 0.025mm layer height, looks just amazing

Primed sanded painted!!! love it!!!

Thank you for the model, I hope you dont mind i changed it a bit to feature the beskar armor and another helmet. You may post this STL on your account if you like

Anet AM8 without support

Fun Print - Manually added support to chin - 75% scale (1:6 scale range)

The Mandalorian bust primered and ready to paint soon. Will update with fully painted bust

The Mandalorian painted with Scale75 and GW acrylic paints

Printed at 175%. 62 hours at 1.2 layer.

Definitely need some work on my printer, but this is 50% scale. Any advice or tips are welcome! Thanks for an awesome file!

75% size

nice work man

Absolutely love this Mandalorian, the detail is epic and can really be seen front to back - I even done a timelapse for it - youtu.be/xZFafy8cSKY

5% infill on bust 15% on base One of my first "real" prints on my first printer, very happy with the results. Thanks for a good model.