Timelapse Clock Holder for Geeetech A10
Timelapse Clock Holder for Geeetech A10
Published 2020-01-05T17:20:15+00:00
This is a Timelapse Clock Holder for Geeetech A10.
It is fixed on the X axis.
The button is designed by Stebo : https://www.thingiverse.com/thing:1570116
Print Settings
1 x TimelapseClockHolder1 : Layer:0.20mm Raft:no Support:no Infill:100%
1 x TimelapseClockHolder2 : Layer:0.20mm Raft:no Support:no Infill:100%
1 x TimelapseClockHolderButton : Layer:0.20mm Raft:no Support:no Infill:20%
1 x TimelapseClockHolderButtonCap : Layer:0.20mm Raft:no Support:no Infill:100%
Accessories
1 x m6x35mm Hex Head
1 x m6 jam nut
1 x m4x14mm SHCS
The clock must be 90mm in diameter and 25mm deep.
Mounting
Mount the clock into TimelapseClockHolder2.
Fix the TimelapseClockHolder1 on the X axis with the m4 screw ; this screw also maintain the belt tensionner.
Put the m6 screw in the TimelapseClockHolderButton.
Put the TimelapseClockHolderButtonCap on the TimelapseClockHolderButton.
Insert the TimelapseClockHolder2 on TimelapseClockHolder1 and fix them with the TimelapseClockHolderButton and the m6 jam nut.
Date published | 05/01/2020 |