If you found this model, you already know what Tonies and Tonieboxes are. If not: Toniebox is a small music box, specifically build for children. New music and audi books can be added by putting a little figure on the top. This and some additionally features makes it very easy and user friendly for children.

With this design you can now put your Toniebox and all your Tonies on the wall. 

Features:

• Puzzles are all the same. Print as many as you want and put them together
• Either print the puzzle pieces with the already available holes or print the one with the 'hidden' holes and only drill the ones open that you want/need.
• Figure and Toniebox platform have all the same hole spacing. They can be placed wherever you want.
  Figure platform has grooves to add magnets (top and bottom)

Non printable parts:

To attach the platforms you need two M4x20 screws and two M4 nuts for each platform. For the backplate / wall mount you just need a standard screw.
I added a small groove for magnets in the figure platform (top and bottom) to ensure a better stand. I used the following ones: https://www.amazon.de/Magnete-Magnetics-rechteckig-Permanentmagnet-Building/dp/B077L1RPRM/ref=sr_1_10?ie=UTF8&qid=1540157629&sr=8-10&keywords=neodym+magnet. One Platform needs 12 magnets (6 top and 6 bottom)

Upload a make if you print it!

Tip me if you like it!