Totoro Tea Candle Holder With Umbrella
Totoro Tea Candle Holder With Umbrella
3D
Published 2018-10-29T16:10:50+00:00
I created this piece for my wife and I got her permission to share it with everyone! I printed it on my Prusa I3 Mk3 with 20% infill. The middle is hollowed out to reduce the amount of material. However, it still comes out pretty hefty. I designed it so that a tea candle (battery operated) will fit nicely in the tray. This piece looks great on the shelf either painted or unpainted! Overall, Totoro stands 21cm high with the umbrella.
*Update 10/30/18
I just noticed that there was an issue with the upload and the small sleeve part was corrupted. Very sorry for any inconvenience! I've re-uploaded the .stl file with all the parts.
The umbrella can be a bit tricky to print so I split it into two halves and glued it together. A small sleeve is glued to the underside to support the umbrella pole. For that, I used a short piece (about 10.5cm) of 3.15mm metal rod from the hardware store.
| Date published | 29/10/2018 |
| Dimensionen | 140mmx125mmx165mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |
Thanks for sharing such a nice model to print. I did a little addition to get things put together for a photo till I can find a rod for it.