Two Castle Paperweights in 1:288 Scale
Two Castle Paperweights in 1:288 Scale
3D
Published 2020-03-06T20:05:02+00:00
Here are two paperweights that I am using on my desk. Both are from previously posted components that simply have been combined to create a complete castle in 1:288 scale. They could also be used as game markers or simply painted and displayed on a shelf.
Links to two small games where you can walk about inside virtual dioramas of both castles are at https://play.unity.com/mg/other/a-different-abandoned-castle and https://play.unity.com/mg/other/webgl-builds-214863 . Here you can experience the creaking door hinges, ever-changing views and the winding staircases by yourself !
Because I just added individual modules together, the results unf. were monster files which took quite long to print out on the FDM printer - at 0.15mm layers and 0.4mm nozzle, I still had nine hours for the smaller castle, and eleven for the larger one. At 0.05mm layer height and 12 sec. layer exposure time, the timeframe on my Elegoo should be about the same, but the quality should be a good deal better than shown here in my pictures, although with 55 g of resin the cost would be a bit higher too. More images to follow....
| Date published | 06/03/2020 |
| Support Free | YES |