Under Desk Cord Holder
Under Desk Cord Holder
3D
Published 2018-01-17T15:43:17+00:00
With my computer under my glass desk, my USB cords are always dangling down and getting run over by the chair (damage in pictures as proof). I finally did something about it. I made this. This is designed for use on a 3/8" (1.1 cm) diameter bar. If you have a different sized bar, you can go to Onshape.com and create a copy of my design and adjust what you need to. This one is built to hold 3 cords, but you can easily add more. In the completed version in the download, there is also a hole in the middle of the clip for a Zip Tie if you want extra assurance that it will hold. Mine fit very snuggly so I'm sticking with my prototype.
Onshape link: https://cad.onshape.com/documents/bd92b0c416ed1c24059bb737/w/5354a529975a7ca07910352e/e/04c4b4319bfeb0da08b4c870
Supports will be needed for the "fingers" and clamp sections. I strongly recommend doing manual supports so you can position them near the end for easy removal. The Zip Tie hole does not need supports.
| Date published | 17/01/2018 |
| Benoetigte Zeit | - 67 Minuten |
