Universal Phones and Tablets Holder - Version 3 from Vinovation
$0.99 Universal Phones and Tablets Holder - Version 3 from Vinovation
3D
Published 2019-05-26T19:00:26+00:00 • Remixed from Phone Mounting System - Version 2 From Vinovation, Phone mounting system - Version 1 (old) - From Vinovation
Hi,
Thanks for visiting.
This product is a Universal Phones and Tablets Holder and an upgrade from Phones Mounting System - Version 2 from Vinovation
FEATURES:
- It is designed to mount most phones and tablets
- The phone/tablets clamp can grab phone/tablets very firmly. And it is suitable for most phone/tablets.
- The clamp fingers were designed with an angle of around 45 degrees to prevent them from accidentally press the buttons on the side of the phone/tablets.
- The bolts and nuts included in the design are standard M4.
- Legs can be disassembled easily so it can be fitted inside a bag without taking too much space during travel. (See photo)
- Improved Design Appearance
- Bugs fixed
Please refer to the assembly drawing attached for required parts and screws. You will also need two more rubber bands to complete the assembly.
Note:
Recommend to print 100% infill for most parts except the legs with 50% infill.
Please refer to the photos attached on how to orient the parts on the print bed, fail to do this may result in failure of the product during use.
END:
Happy Printing
Best Regards,
Henry
| Date published | 26/05/2019 |
| Price | $0.99 |