USA Coin Map (Quarters)
USA Coin Map (Quarters)
Published 2020-09-27T12:05:14+00:00
One of my friends wanted to display her coin collection and asked me to design/print this. Designed for US quarters but can be scaled to accommodate different coins. Holes added to allow for the coins to be removed due to the press fit nature of the parts. To simplify certian states, seperated landmasses were connected to form a single component. (Note, the design should have a small space between parts ~1mm)
Products used:
https://filaments.ca/?rfsn=4740568.a03b49
Note: Affiliate link above - I earn a commission from qualifying purchases at no additional charge to you just by using the links listed which helps support the channel.
To find more of my work, please check out my website: http://wrightbuilt.ca/
To download any of my own 3D designs, check out my design library: https://www.myminifactory.com/users/WrightBuilt.ca
Support me by Subscribing/Liking my YouTube channel, or by tipping me via MyMiniFactory (PayPal) here: https://www.myminifactory.com/users/WrightBuilt.ca
You can find my disclaimer here: http://wrightbuilt.ca/disclaimer-page/
Printed on Prusa i3 Mk2.5s with MMU2.5s Single at 150% speed. (Printer needs a tune up)
Should be oriented for supportless printing. (Laying bottom on the buildplate)
Filament used was PRUSA Silver, Fillaments.ca INGEO 850 Black/White, and cheap Grey
Date published | 27/09/2020 |
Dimensionen | 540x360x5 |
Support Free | YES |