VMO DECATHLON MASK ADAPTOR AND FIT 3M FILTER - 3D-PRINTED PROTECTIVE - CORONAVIRUS COVID-19
VMO DECATHLON MASK ADAPTOR AND FIT 3M FILTER - 3D-PRINTED PROTECTIVE - CORONAVIRUS COVID-19
3D
Published 2020-04-21T15:55:13+00:00
VMO DECATHLON MASK ADAPTOR AND FIT 3M FILTER:
Adaptador y Filtro D: 8 cm
(Adaptor and Filter)
https://www.youtube.com/watch?v=lrQWaV4bhJ8&feature=youtu.be
FILTER FIT TO VMO MASK V3:
https://www.myminifactory.com/es/object/3d-print-117089
Utilizar en situaciones de alto riesgo, con Filtro Original 3M N95
(For use in high risk situations, with N95 3M original filter).
El porta filtro es removible y tiene anclaje tipo 3M serie 6000
(The filter holder is removable and fit some 3M filters 6000 series)
YOU MUST SEAL PLA or PETG, before use
May use PLASTIC FLEXI-PRIMER or similar
YOU MUST CHECK THAT THE ADAPTOR IS TOTALY SEAL BEFORE USE
ES OBLIGATORIO SELLAR EL PLA o PETG, antes de utilizar
Puede utilizar PLASTIC FLEXI-PRIMER or similar
ES OBLIGATORIO VERIFICAR QUE EL ADAPTADOR ESTE TOTALMENTE SELLADO ANTES DE USAR
https://www.ebay.co.uk/itm/E-Tech-ER00110-Technik-Plastic-Transparent-Pre-Primer-Spray-400ml/174058856084?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Se necesita (Need)
O Ring: D: 22mm and 32mm
Plastico (Nitrile Rubber or plastic): D: 26 mm 50 micron (0.05mm)
Plastic Punched Pocket Folders
https://www.amazon.co.uk/Quality-Plastic-Punched-Pockets-Folders/dp/B07B9BDD9T/ref=sr_1_2_sspa?
crid=29JRWWFKB5UTZ&dchild=1&keywords=punch+pockets+a4&qid=1585506496&sprefix=Punch+pocket%2Caps%2C172&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSFU0OVFWQVJHQVk2JmVuY3J5cHRlZElkPUEwNTMwMDgzMkxFNjRYTDhUWTFNTCZlbmNyeXB0ZWRBZElkPUEwODE3NzEyMjY4VFdWVkY2MFczRyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
IMPRIMIR (Print):
Recomiendo hacer el Test de Expansión Horizontal, para verificar si la impresora esta correctamente calibrada, antes de imprimir las piezas.
(I recommend doing the Horizontal Expansion Test, to verify if the printer is correctly calibrated, before printing the parts).
HorizontalExp.stl
FILTER CAP CIR80-12.stl
FILTER CIR80.stl
3D PRINTING SETTINGS
Layer Height: 0.20 to 0.28mm
Nozzel: 0.4mm or 0.8mm (Recommended)
SIN SOPORTES (No supports needed)
PLA or PETG
| Date published | 21/04/2020 |