Minimalist, easy and simple to print.
X = 21.75mm
Y = 9.56mm
H1 = 3.63mm (tab height)
H2 = 5.18mm (height of the part with the hole for the screw)
Hole = 4.42mm (diameter)
BEFORE YOU PRINT: Make sure you have a screw that fits in the hole or change the model for the measure of screw.
If you don't know how to use a 3D modeling software, post the size of the screw on the comments and I'll change and upload the model as soon as I can.
PLEASE: Consider posting a making, this helps a lot.
Say thanks by giving a tip and help me continue to create and share.