X-men Cyclops' Visor
X-men Cyclops' Visor
3D
Published 2015-07-17T20:09:13+00:00
The visored mask Cyclops wears to prevent random discharge is lined with powdered ruby-quartz crystal. It incorporates two longitudinally mounted flat lenses which can lever inward providing a constantly variable exit slot of 0 inches to .79 inches in height and a constant width of 5.7 inches. The inverted clamshell mechanism is operated by a twin system of miniature electrical motors. As a safety factor there is a constant positive closing pressure provided by springs. The mask itself is made of high-impact cycolac plastic. There is an overriding finger-operated control mechanism on either side of the mask, and normal operation is through a flat micro-switch installed at the base of the thumb on each glove.
Printed at 0.2 mm layer height, with 10% infill uses 31 m of filament and takes 7 hours 40 minutes.
| Date published | 17/07/2015 |
| Menge an Filament | 31g |
| Dimensionen | 171mm x 119mm x 60mm |
| Schwierigkeitsgrad | Medium |
