1.9 Beadlock Wheel 10 Trailer Version
1.9 Beadlock Wheel 10 Trailer Version
3D
Published 2019-03-29T09:55:40+00:00
This beadlock wheel is for 1.9 rc crawler and scaler tires. This variation uses 4mm or 5mm x 11mm(OD) bearings in the bores of both inside and outside. This way you can mount it to spin freely on a trailer or non driven application.
File naming convention:
GHAABBCCDDT
GH= Goodson's Hobbies
AA= Wheel model #
BB= tire size 19=1.9 22=2.2
CC= wheel width (inside of front and back lip *Note: this is changed from previous wheels)
DD= back spacing, distance from outside of back to inside of hex surface
T= trailer version
For example GH08192110 = Goodson's Hobbies Model 08, 1.9 size, 21mm wide, 10mm of backspacing.
I recommend flipping the "back" file 180 degrees to print on the flat surface and you'll have a beautiful print. Finish this wheel with 5x M3x8 screws or 5x #4 x 5/16 (6mm or 1/4" long screws will work too but won't have as much bite), I recommend self tapping screws.
If you print it, I'd love to see it, share here, or tag me on instagram.
Find me on instagram @goodsons_hobbies
| Date published | 29/03/2019 |