Aqueduct Planter
Aqueduct Planter
3D
Published 2020-05-12T16:32:12+00:00
Bes sure to check out my other Free & Premium Designs!
----
Every year I like to grow a variety of plants. Mostly herbs and peppers. But space in sunny areas is limited for me and anything growing in a pot I have a tendency to accidentally overwater during the summer months. Inspired by my internet searches on vertical planting to utilize space, I decided on creating my own "Aqueduct Planter" system. With an aqueduct planter system, planters can be hung vertically along a wall and modularly added on to as needed. Water is shared through the system, flowing from the top planters into the bottom, saturating the soil of each plant along the way.
Check out the Printing Details section on print settings used to make the aqueduct planter setup. A minimum build volume of 8" x 8" x 7" printer is needed to print these planters. If you want to learn how to design your own check out my Instructables tutorial for designing your own Aqueduct Planter sytem in Fusion 360.
Planter
Average print time per planter: 7-10 hrs
Plastic usage: Approximately 0.28 - 0.30lb
Layer Height: 0.3mm
Fill: 18%
Speed: 60 mm/s
Supports: Optional. (I didn't care if there was a few small issues with the print bridging inside the planter so I printed without supports)
Rafts: No
Pins
Pins Needed: 6x
Layer Height: 0.3mm
Fill: 60-70%
Supports: No
Rafts: No
| Date published | 12/05/2020 |
| ¿Cuándo tiempo lleva? | 400 - 600 minutos |
| Dimensiones | 151.43 mm x 110 mm x 154.3 mm |