3 Cube Puzzle
3 Cube Puzzle
Published 2020-02-07T18:44:00+00:00
The goal of this puzzle is to make three cubes from the given pieces.
See Build Instructions here: https://www.instructables.com/id/Three-Cube-Puzzle/
For the print, all the parts are the same. You will need to print 3 pieces. Two STL files are included. For the magnets, one has a 5mm hole while the other is slightly oversized (5.1mm). I would try the 5mm first. This worked for me but all printers are different. If the 5mm is too loose, use a little epoxy before inserting the magnets.
Magnets link: https://amzn.to/2GNeK1c
The red, green and yellow picture shows the solution. Note that you might need to shuffle the parts around due to magnet polarity.
Solution: https://youtu.be/f4uDDqVUijo
Please let me know if you have any questions!
Date published | 07/02/2020 |
Sin apoyo | YES |