4 Bottle Puzzle
4 Bottle Puzzle
3D
Published 2018-04-17T09:08:34+00:00
This is a fully 3D printable 4 Bottle puzzle. See if you can remove the slider from the puzzle.
Print the base and cover in Clear filament. If you don't have clear filament then use a peice of Acrylic for the cover.
You will need to print the following:
4x 6mm balls
4x bottle
1x cover
1x slide
1x base
The 6mm balls should be printed at 0.05mm layer height. Supports shouldn't be needed but you will want a good 4mm brim on them.
I printer the base and Cover in clear PETG at 0.2mm layer height. The slider and bottles will also be printed at 0.2mm layer height.
You will want to have the balls a different color thatnt he bottles and slide if you intend to use clear filament for the cover instead of a piece of acrylic.
A bit of super glue on the top surfaces of the base is all you'll need to hold the cover of acrylic in place.
| Date published | 17/04/2018 |
| ¿Cuándo tiempo lleva? | 300 - 360 minutos |
| Cantidad de filamento | 64g |
| Dimensiones | 111.5x85x8 |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |