40 mm cooling fan for E3D v5
5,752
visitas
341
descargas
1
colección
0 comentarios
Cargando comentarios...
40 mm cooling fan for E3D v5
3D
Published 2014-11-03T13:15:32+00:00
11
0
Add to Collection
Descripción
All the cooling fans for the E3D are 30mm that I didn't had so designed my own design also because nothing fitted correctly in my design.
I'm building a new printer saw some designs and made my own version of it only the problem I had is that I needed to redesign the hole top part the xy carriage and stuff.
And I'm using a E3D full alu hotend the V5 but the standard cooling did not fit it anymore so I made my own design on this because standard it has a 30mm cooling fan but I don't have 30mm only 40 so I redesigned it for 40mm cooling fans :)
Detalles de impresión
Print at 0.2mm layer height, with 10% infill. This uses 10g of filament and takes 62 minutes.
Información técnica
Date published | 03/11/2014 |
¿Cuándo tiempo lleva? | 45 - 70 minutos |
Cantidad de filamento | 10g |
Dimensiones | 40mm x 48mm x 40mm |
Complejidad | Muy fácil |
Más información
Archivos