4x4 Puzzle Cube Holder
3D
This is a box for the amazing 4x4 puzzle by New Matter.
I designed it in OnShape where I tried to make it adjustable to different parameters like tolerance, cube size and added a hexagonal pattern design. The pattern was made a little bit smaller than the pieces, so they would not go through.
The thickness of the walls are 1.2mm, so it's a very clean print for a 0.4mm nozzle.
It came out perfect, if a little snug, on first print.
Printed in Fillamentum Crystal Clear filament on an Original Prusa i3 MK2S.
A little sanding and it looks incredible.
Try with a transparent/translucent filament
0.2mm Layer Height
0.4 nozzle size
10% infill (but it does not really matter, since the walls are this thin)
No support needed
100mm/s using Linear Advance
Scale up by a few % if your tolerance are higher than 0.15mm
| Date published | 30/04/2018 |
| ¿Cuándo tiempo lleva? | 46 - 60 minutos |
| Cantidad de filamento | ~8.3 grams |
| Dimensiones | 43.60mm x 43.60mm x 41.20mm |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
