3D-printed Differential
3D-printed Differential
3D
Published 2019-04-18T17:35:11+00:00
This is a model of a mechanical differential. It's a fun little project with a real working end result. Learn more about automotive mechanics and gearwheels.
Additional parts:
· 1 35mm motor with 2mm shaft
· 5 M3 bolts 25mm
· 6 M3 bolts 10mm
· 2 M3 bolts 45mm
· 13 M3 nuts
· 4 short woodscrews
· 1 piece of wood
· 2 15x30x10 mm bearings
For more detail's about this model please visit www.project-recorded.com.
Folow me on Twitter
The bevelgears are printed with a 0.10 mm layer height. The other parts with a 0.15 mm layer height.
Please note I printed the Bearing clamps with support material.
| Date published | 18/04/2019 |
| ¿Cuándo tiempo lleva? | 200 - minutos |
| Cantidad de filamento | 40 grams |