AEAADV04 - Wasteland Cage
$2.00 AEAADV04 - Wasteland Cage
3D
Published 2020-11-30T15:59:32+00:00
This set is included in our 3 month loyalty pack for Tribers pledging $15 or more.
This giant 150mm scatter cage provides a massive space to put NPCs or wayward players. The door slots down into place and raises for easy access. All models print without supports.
Gremlin Miniature not included.
This model was sculpted by Nasos Maloudis for the patrons of Aether Studios.
TERRAIN Recommended Print Settings:
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% recommended for all models
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE Recommended Print Settings:
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 30/11/2020 |
| Precio | $2.00 |
| Sin apoyo | YES |