Acetone vapor chamber for ABS - vent holder
Acetone vapor chamber for ABS - vent holder
3D
Published 2021-03-11T21:23:18+00:00
If you need smooth your ABS 3D prints here is simple solution. Acetone vapor chamber with sealed vent holder. 3D prints smoothed in chamber with vent inside are much better surface quality becose acotone vapors flow around objects.
If you have questions regarding assembling, suggestions to the project or want to see on what I'm currently working on, please join to Discord channel:
Parts needed to build:
1. Plastic, sealed box - best is IKEA one: IKEA 365+ 10.6 liter
https://www.ikea.com/de/de/p/ikea-365-vorratsbehaelter-mit-deckel-rechteckig-kunststoff-s79276760/
If you dont have possibility to buy in Ikea, you can buy something similar but please note, box material must be sealed and made with PP (polypropylene).
2. Brushless computer vent (if you use any other type, box can explode). STLs are prepared for vent size 60x60x25 but if you have different size just let me know in comments. I will add fixation siutable for your vent.
3. For the printed parts please use PETG filament.
4. Six or eight neodymium magnets. They are needed to hold towel paper in place.
5. Hot glue to fill up holes where are vent cables located.
6. Power supply, can be for mobile phones. 5V its enough for 12V vent.
7. M5x50 hex cap screw DIN 933 and M5 nut
All parts can be printed without support
| Date published | 11/03/2021 |
| Sin apoyo | YES |