Affinity Pool Solar Lamp Bracket
3,827
visitas
174
descargas
3
colecciones
0 comentarios
Cargando comentarios... 
Affinity Pool Solar Lamp Bracket
3D
Published 2016-07-04T16:35:01+00:00
28
0
Add to Collection
Descripción
My wife wanted to add solar lights to the edge of our Affinity Pool garden water feature. I created a two part bracket to clamp the lights in place on the edge of the pool. The design uses an M3 x 20mm bolt and an M3 nut to secure the bracket. The clamp part has a hex cutout to hold the nut in place. The example pictured was printed in Verbatim black PLA on a Wanhao D4S with a layer height of 300 microns and a 15% infill. No support is needed when printed on its side. The solar lights are of a type widely available in the UK from various Pound type outlets.
Información técnica
| Date published | 04/07/2016 |
| ¿Cuándo tiempo lleva? | - 68 minutos |
| Cantidad de filamento | 19g |
| Dimensiones | 67x68x18 |
| Tecnología | FDM |
| Sin apoyo | YES |
Más información
Archivos