Again with a Companion/Storage Cube
Again with a Companion/Storage Cube
3D
Published 2018-01-23T16:52:38+00:00
Well its time again for a Portal Cube.
This IS a Box You can hide things in this!
I found this some time ago as a post. I went searching recently and found it also as an Instructable. But, it is not easily accessible here via Thingiverse. I'd ask for the others to post the cube here but, I guess their stuff is too old to be monitored. So --- from: http://www.instructables.com/community/Rapidprototyped-Weighted-delCompaniondel-Stor/ --- Here is a Companion/Storage Cube.
Note: This is a BOX! I printed one very small Cube on my Thing-O-Matic (yellow) and a full 2" one on a V-Flash. Both are good to have!
1) Download the STL files - both bottom and lid.
2) Load on your printer and print. They are clean files.
3) Put together and enjoy.
OR
1) Download the Solid Works files and tweak.
Since I did not make this nor have the skills yet any questions will need to be answered by the other readers. ENJOY!
Be sure to give credit where due and go to the Instructable link above and give your, "Thank You." ---
| Date published | 23/01/2018 |