Airdrop Humidifier
Airdrop Humidifier
3D
Published 2020-01-07T01:25:11+00:00
For full screen, go to YouTube.
Since it is designed not to require a supports.
It is not necessary to post-process after output.
It is recommended to use PLA.
I used a 0.3~0.4mm nozzle.
Layer height is recommended 0.1mm.
If the nozzle you use is larger than 0.3~0.4mm,
If you enlarge the model, it will print well.
Because the model is detailed, it will look great even with larger outputs.
For correct assembly, please watch my youtube video.
Channel : https://www.youtube.com/c/CUBEBlueSky
Buy Bulb Humidifier :
https://www.amazon.com/Creative-Humidifier-Waterless-Whisper-Quiet-153x88x88mm/dp/B07WXG27X9/ref=sr_1_14?crid=DWNDJ3GY31GQ&keywords=bulb+humidifier&qid=1578353417&sprefix=Bulb+Humi%2Caps%2C324&sr=8-14
https://www.aliexpress.com/item/32913569240.html?spm=a2g0o.productlist.0.0.978a38eeWNBap3&algo_pvid=30699060-c63a-4c0b-9137-dab73096dcd5&algo_expid=30699060-c63a-4c0b-9137-dab73096dcd5-57&btsid=92a7b231-c2f4-4192-aca9-8ed6de268f2d&ws_ab_test=searchweb0_0,searchweb201602_3,searchweb201603_53
| Date published | 07/01/2020 |
| Sin apoyo | YES |