Arthritis Aid - Sandwich Holder
2,911
visitas
39
descargas
0 comentarios
Cargando comentarios... 
Arthritis Aid - Sandwich Holder
3D
Published 2018-10-23T15:42:12+00:00
3
0
Add to Collection
Descripción
I based this deisgn on an aid that I found here - https://www.alimed.com/quad-quip-sandwich-holder.html.
The one at the link above costs $20. The two printed parts cost $0.55 and $0.19, and the bolt and nut cost $0.68. All together that is $1.42, which is much cheaper than the commercial option.
I couldn't find any rubber bands when I was taking the picture so I improvised with a hair tie.
I used FreeCAD to design the two parts and Cura as my slicer.
Detalles de impresión
I used Hatchbox Grey PLA and these were some of my settings.
- Layer Height: 0.2 mm
- Top/Botom/Wall Thickness: 4 layers
- Infill: 25% - Grid Pattern
- Temperature: 210 C
- Print Speed: 70 mm/s
Información técnica
| Date published | 23/10/2018 |
| Cantidad de filamento | ~50 g |
| Dimensiones | ~60 mm x ~40 mm x ~180 mm |
| Sin apoyo | YES |
Más información
Archivos