ASUS laptop AC adapter cable saver
1,105
visitas
22
descargas
1
colección
0 comentarios
Cargando comentarios...
ASUS laptop AC adapter cable saver
3D
Published 2020-11-27T16:05:53+00:00
2
0
Add to Collection
Descripción
The strain relief part of my ASUS AC adapter was about to break off completely, so I decided to print something useful.
This is a temporary fix that helps to hold in place the rubber part so that the cable is not strained. I will probably glue it carefully with some epoxy and use the 3d printed part to hold it in place as well as the epoxy cures.
Licencia
Detalles de impresión
I used PLA NX2 at 50 mm/s, 200 °C. You may want to add a brim to help with the adhesion of the slender part.
Layer height = 0.25 mm.
Información técnica
Date published | 27/11/2020 |
¿Cuándo tiempo lleva? | 150 - 180 minutos |
Cantidad de filamento | 34 grams |
Dimensiones | 161mm x 80mm x 30mm |
Más información
Archivos