KS2AZT05 – Aztlan Step Pyramids
$1.00 KS2AZT05 – Aztlan Step Pyramids
3D
Published 2020-08-17T11:17:14+00:00
Aztlan 5: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 29 temple models has increased in size and quality. Aztlan 5: Reforged is now a 59 model set updated with requests. With these models you can build out huge step pyramids complexes. To get the full utility of this set, we recommend you have the Aztlan Starter set at a minimum.
This particular expansion to Aztlan brings sloped step wall pyramid tiles for creating outdoor fighting spaces. This set had its origins in the friendship and foundation of Aether. Aztlan 5 was a cooperative effort and capped off an amazing run that Jacob Armour and I did during the 2nd half of 2018. We had just finished many sets, including Aztlan 5, when we decided to commit ourselves to a swamps Kickstarter.
This set of terrain is compatible with all other DragonlockTM models. In our World of Aach'yn, Aztlan is the home of the Azite Snakefolk and is filled with primal terrors of unspeakable horror. Warring tribes of Azite fight over the control of tombs old and new, while interlopers are disposed of without a morsel of mercy.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
| Date published | 17/08/2020 |
| Precio | $1.00 |
| Sin apoyo | YES |
Various pieces from Aztlan 5 assembled into a pyramid and platform. Accompanied by trees from Aztlan 6.