KS2AZT11 - Aztlan Half Sized
$5.00 KS2AZT11 - Aztlan Half Sized
3D
Published 2020-12-01T12:08:27+00:00
Included in this set of 3d printable miniatures are 16 .STL models of half sized Dragonbite terrain. This set was one of the first requests we got for the Aztlan Set Series. Fans loved the style, but wanted to make sure we had a half sized variation to get as much utility from big prints as possible. This set has continued to be updated over the last few years to expand that utility to the maximum.
TERRAIN Recommended Print Settings:
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% recommended for all models
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 01/12/2020 |
| Precio | $5.00 |
| Sin apoyo | YES |