Balco3DTouch - Spacers for bed leveling
1,215
visitas
48
descargas
2 comentarios
Cargando comentarios...
Balco3DTouch - Spacers for bed leveling
3D
Published 2021-03-17T17:56:35+00:00
4
2
Add to Collection
Descripción
I made a spacer for easier bed leveling on the Balco3DTuuch (exact copy of the Wanhao Duplicator I3 Plus and the Cocoon Create)
- First, you have to unscrew the bed and put the spacers in between the heating bed and the moving platform.
- After that, you screw the heating bed on the moving platform. Make sure that the springs are in the spacers.
Now you've got (almost) always a levelled bed :)
Licencia
Detalles de impresión
- 0,15 mm Layer heights
- 20% Infill
- 50 mm/s
Printtime is about 17 minutes for 1 spacer.
Información técnica
Date published | 17/03/2021 |
Cantidad de filamento | 2 grams |
Sin apoyo | YES |
Más información
Archivos