Bike Repair Stand
Destacado
9,359
visitas
369
descargas
3
colecciones
0 comentarios
Cargando comentarios... 
Bike Repair Stand
3D
Published 2018-10-31T14:56:31+00:00
103
0
Add to Collection
Descripción
I really liked the idea of the bike stand by bandit-ed. I had some aluminium-tubes laying around with a diameter of 25.3 mm. Since no source files were available I designed my own version of the stand in Fusion 360.
You will need 3 M5 screws and nuts to press-fit the parts.
Tubes with a slightly smaller or bigger diameter should also fit. I used the following lengths:
2 x 780 mm
2 x 367 mm
You can find the fusion 360 file here if you want to modify the model.
Detalles de impresión
Resolution: 0.2 mm
Infill: 30 %
The bottom part requires a little bit of supportmaterial. The other parts can be printed without supports.
Printed in PLA with 3 perimeters
Información técnica
| Date published | 31/10/2018 |
| Tecnología | FDM |
| Complejidad | Fácil |
Más información
Archivos