Bonnie Geartop Box
$3.90 Bonnie Geartop Box
3D
Published 2021-12-21T14:43:53+00:00
My wonderful Patreon supporters get this model free! :)
More gears! Potentially noisy ones, too, if you so desire. This cog-laden box (with cog-style eyelashes, if you choose to interpret them that way) has a big surrounding gear at the bottom that rotates against a smaller gear at 90 degrees to it that drives a lid open and closed. Levers attached to the big cog mean you can readily open and close the lid in an annoying and noisy manner!
You can read the rest of the original writeup here:
https://www.patreon.com/posts/60167011
This is an articulated model, so check that your bottom layer is nice and neat, and that you don't have any print issues like stringing or overextrusion that might bind moving parts together.
As usual, all the angles are designed for straightforward printing, and no supports are required!
| Date published | 21/12/2021 |
| Precio | $3.90 |
| Sin apoyo | YES |
Printed with X3D PLA Pro Sky Blue at 201°C hot end and 60°C bed. Teh lock nut was printed with CCDIY Materials PLA Orange. Another great Print In Place model; by Clockspring.