Brazier with flame (OpenForge compatible)
Brazier with flame (OpenForge compatible)
3D
Published 2015-07-01T16:44:19+00:00
This is a brazier on four legs, designed for use in a tabletop dungeon. It also comes with a separate flame element that you can print in red (or paint), so you can have a flaming or an empty brazier. Very convenient for when a wizard casts a spell to douse all the lights in the room!
It measures just under 1" wide and about 2" tall. It prints without support on my Printrbot Simple, though I had to invert the brazier to make it print most cleanly.
It is completely compatible with OpenForge and Dwarven Forge, and is designed to fit within a standard 1" square.
This entry includes with 3 files: "Brazier - base" which contains just the brazier itself; "Brazier - fire" which is just the fire, and "Brazier - base and fire" which contains both if you want a single print.
Thanks to my Patreon supporters for their contributions, which made this piece possible.
To test, I printed this object with 30% infill at 0.1mm layer height. I had to invert the brazier itself so that it would print most cleanly, but it also prints okay the "right" way up. The brazier prints better with a 1-layer raft.
Printed at 0.2 mm layer height, with 10% infill uses 0.2 m of filament and takes 10 minutes.
| Date published | 01/07/2015 |
| Dimensiones | 16mm x 16mm x 26mm |
| Complejidad | Fácil |