Business card and pen holder
3,052
visitas
75
descargas
1
colección
0 comentarios
Cargando comentarios...
Business card and pen holder
3D
Published 2017-03-03T11:44:38+00:00
13
0
Add to Collection
Descripción
I wanted to play around with making funcitonal objects using vase mode to help quick prints. I created this to fit normal 3.5in x 2in business cards and a pen or pencil under 15mm in diameter.
the warped look at the top was designed to keep the cards from falling out when stuffed in a desk.
Spiralize the outer contour, at 0.2mm print height. 150mm/s print speed. 75mm/s upper and lower portions. prints in about 30 minutes.
0.5mm line width using a .4mm diameter extruder.
(you can substitude higher material flow rate instead of the 0.5mm line width, but that would cause buldging in the base plate.)
Información técnica
Date published | 03/03/2017 |
¿Cuándo tiempo lleva? | - 28 minutos |
Cantidad de filamento | ~ 6 grams of pla |
Dimensiones | 68mm X 63.5 X 12.7mm |
Tecnología | FDM |
Complejidad | Medio |
Sin apoyo | YES |
Más información
Archivos