BUTTERCUP
2,785
visitas
162
descargas
1
colección
0 comentarios
Cargando comentarios...
BUTTERCUP
3D
Published 2018-07-30T17:29:29+00:00
49
0
Add to Collection
Descripción
Base print at 0.2mm (Black Model)
Rest of all the other parts print in 0.1mm
Tip: When you print the inners, make sure you print them at 0.5 % smaller... So If the black part is printed at 80%, then the rest should be around 79.50%
Información técnica
Date published | 30/07/2018 |
Tecnología | FDM |
Complejidad | Fácil |
Más información
Archivos